Loading the virtual lab…
12th Physics Practicals: Virtual Lab
All 10 experiments from the Tamil Nadu State Board 12th Physics practical manual. Take readings on a virtual setup, fill the observation table, calculate the result and practise viva questions. Tap 💡 tips to see what each control does.
Use this to prepare before your lab period. The board practical exam is done on real apparatus.
Experiment list and procedures: TN State Board 12th Physics practical manual. Values are simulated for practice; readings on real apparatus will differ slightly.
Experiments in this lab
1Specific resistance of a coil using a metre bridge
Aim: To determine the specific resistance of the material of the given coil using a metre bridge.
Apparatus: Metre bridge, galvanometer, key, resistance box, Leclanché cell, jockey, high resistance, screw gauge, connecting wires.
2Horizontal component of the Earth’s magnetic field using a tangent galvanometer
Aim: To determine the horizontal component of the Earth’s magnetic field using a tangent galvanometer.
Apparatus: Tangent galvanometer, commutator, battery eliminator, rheostat, ammeter, key, connecting wires.
3Comparison of emf of two cells using a potentiometer
Aim: To compare the emf of the given two cells using a potentiometer.
Apparatus: Potentiometer, battery eliminator, key, rheostat, DPDT switch, Leclanché cell, Daniell cell, galvanometer, high resistance box, pencil jockey, connecting wires.
4Refractive index of the material of a prism using a spectrometer
Aim: To determine the refractive index of the material of the prism by finding the angle of the prism and the angle of minimum deviation using a spectrometer.
Apparatus: Spectrometer, glass prism, sodium vapour lamp, spirit level, reading lens.
5Wavelength of the constituent colours of a composite light using a diffraction grating
Aim: To determine the wavelength of the constituent colours of a composite light using a diffraction grating and spectrometer (normal incidence; N = 6000 lines per cm is given).
Apparatus: Spectrometer, plane transmission grating, mercury vapour lamp, spirit level, reading lens.
6V-I characteristics of a PN junction diode
Aim: To draw the voltage–current (V-I) characteristics of the PN junction diode and to determine its knee voltage and forward resistance.
Apparatus: PN junction diode (IN4007), regulated power supply (0–15 V), voltmeter, milliammeter, microammeter, resistor (100 Ω), bread board, connecting wires.
7V-I characteristics of a Zener diode
Aim: To draw the voltage–current (V-I) characteristic curves of a Zener diode and to determine its knee voltage, forward resistance and reverse breakdown voltage.
Apparatus: Zener diode, regulated power supply (0–15 V), voltmeter, milliammeter, microammeter, resistors (100 Ω, 470 Ω), bread board, connecting wires.
8Static characteristics of an NPN junction transistor in common emitter configuration
Aim: To study the characteristics and to determine the current gain of an NPN junction transistor in common emitter configuration.
Apparatus: NPN transistor (BC548 / BC107), two regulated power supplies, two voltmeters, milliammeter, microammeter, resistors, bread board, connecting wires.
9Truth tables of the basic logic gates using integrated circuits
Aim: To verify the truth tables of AND, OR, NOT, EX-OR, NAND and NOR gates using integrated circuits.
Apparatus: Digital IC trainer kit, ICs 7408 (AND), 7432 (OR), 7404 (NOT), 7400 (NAND), 7402 (NOR), 7486 (EX-OR), connecting wires.
10Verification of De Morgan’s theorems using integrated circuits
Aim: To verify De Morgan’s first and second theorems.
Apparatus: Digital IC trainer kit, ICs 7404, 7408, 7432, 7400, 7402, connecting wires.