Tests Based on Sampling Distributions II - 12th Statistics MCQ
Chapter 3 of 12th Statistics covers the F-distribution and its uses: the variance ratio test for the equality of two normal population variances, one-way ANOVA for comparing three or more treatment means, and two-way ANOVA with treatments and blocks, including sums of squares, degrees of freedom and F-ratios.
Study this chapter
Asked in previous board exams
9 questions from this chapter came in 4 past public exams. Open any of them to see the answer and explanation.
-
March 2026
In two-way classification the total variation TSS =See answer in the solved paper →
-
March 2026
F-statistic is the ratio of two Independent sample __________.See answer in the solved paper →
-
March 2025
The Analysis of Variance procedure is appropriate for testing the equivalence of three or more population __________.See answer in the solved paper →
-
March 2025
In two-way classification if TSS = 320, SST = 45, SSB = 70 then SSE = __________.See answer in the solved paper →
-
March 2023
In two-way classification TSS =See answer in the solved paper →
-
March 2023
In ANOVA, the sample observations are :See answer in the solved paper →
-
March 2023
F-test is also called as __________.See answer in the solved paper →
-
March 2020
In two-way classification with 5 treatments and 4 blocks, the degrees of freedom due to error is :See answer in the solved paper →
-
March 2020
In ANOVA, the sample observations are :See answer in the solved paper →
About Tests Based on Sampling Distributions - II
Medium ~60 min study
Tests Based on Sampling Distributions - II is the third chapter of the Tamil Nadu State Board Class 12 Statistics book. It opens with R.A. Fisher, the statistician after whom the F-distribution is named and who developed the analysis of variance.
The chapter first defines the F-statistic as a ratio of two independent chi-square variates divided by their degrees of freedom, then uses it to compare two population variances. It then moves to ANOVA, which tests whether three or more population means are equal, first with one factor and then with a second controlling factor called the block.
This page collects the 20 book-back one mark questions with checked answers and additional practice questions on F-values, critical values, correction factors, mean sums of squares and the decision rules, each with a short worked explanation.
What you'll learn
- Define the F-distribution and the F-statistic.
- Test the equality of two normal population variances.
- State the assumptions of ANOVA and the hypotheses of one-way and two-way ANOVA.
- Compute the correction factor, sums of squares and mean sums of squares.
- Build one-way and two-way ANOVA tables and calculate the F-ratios.
- Compare calculated F with critical values and draw conclusions.
Before you start
- Null and alternative hypotheses, level of significance and critical region from chapter 1.
- Chi-square and t tests from chapter 2.
- Mean, variance and sums of squares of deviations.
Topics covered in this chapter
Tests Based on Sampling Distributions - II explained
What this chapter covers
F-distribution and its applications
If X and Y are independent chi-square variates with m and n degrees of freedom, F = (X/m)/(Y/n) follows the F-distribution with (m, n) d.f. It is used to test the equality of two normal population variances, the equality of k (more than 2) normal population means, and to analyse two-way classified data.
Test for two population variances
The statistic is the ratio of the two sample variances, with (m-1, n-1) d.f. Because it is a ratio of variances the F-test is also called the variance ratio test. Lower critical values are found as reciprocals with the degrees of freedom swapped.
One-way ANOVA
Total variation splits into variation between treatments (assignable causes) and within treatments (chance causes). With the correction factor G squared over n, we find TSS, SST and SSE, then F = MST/MSE with (k-1, n-k) d.f.
Two-way ANOVA
A second factor, the block, is controlled to reduce error variance. TSS = SST + SSB + SSE, the error has (k-1)(m-1) d.f., and separate F-ratios test treatments and blocks.
Common mistakes to avoid
- Dividing the sums of squares by n instead of n-1 when finding the sample variances for the F-test.
- Swapping the degrees of freedom: the critical value is f with (k-1, n-k), treatment d.f. first.
- Using n-1 as error d.f. in one-way ANOVA; error d.f. is n-k, while n-1 is the total.
- Forgetting to subtract both SST and SSB from TSS in two-way ANOVA.
- Reading a lower critical value directly from the table instead of taking the reciprocal with swapped d.f.
Test yourself on these with the practice test, then check the worked reasoning in the solved MCQs.
Frequently asked questions
What is the F-distribution?
If X and Y are two independent chi-square variates with m and n degrees of freedom, then F = (X/m)/(Y/n) follows the F-distribution with (m, n) degrees of freedom. It is named after the British statistician R.A. Fisher (1890 to 1962).
Why is the F-test called the variance ratio test?
The test statistic for comparing two normal population variances is the ratio of the two sample variances, sX squared over sY squared. Because it is based on a ratio of variances, the F-test is also known as the variance ratio test.
What are the assumptions of ANOVA?
The observations follow a normal distribution, experimental units are assigned to treatments at random, the sample observations are independent, and the population variances of the groups are unknown but assumed to be equal.
What is the correction factor in ANOVA?
The correction factor is G squared divided by n, where G is the grand total of all n observations. It is subtracted from the raw sums of squares when computing TSS, SST and SSB.
How are the degrees of freedom split in one-way ANOVA?
With n observations and k treatments, the total has n-1 degrees of freedom, treatments have k-1 and error has n-k. The F-ratio MST/MSE is compared with the F-table value for (k-1, n-k) degrees of freedom.
What is the difference between one-way and two-way ANOVA?
One-way ANOVA studies one factor and the treatment groups need not be equal in size. Two-way ANOVA studies two factors, treatments and blocks, needs equal numbers in each group and gives more accurate results because blocks reduce the error variance.
When is the null hypothesis rejected in ANOVA?
If the calculated F-value is greater than the critical F-value at the chosen level of significance, the null hypothesis is rejected and we conclude that at least one pair of means differs significantly.
Last updated 28 October 2026