15 extra multiple-choice questions for Tests Based on Sampling Distributions - II (12th Standard Statistics, Samacheer Kalvi), beyond the ones printed in the textbook — each with the correct option highlighted and a clear, worked explanation. Free to read in English and Tamil.
Q1
If X and Y are two independent \( \chi^2 \) variates with m and n degrees of freedom respectively, which statistic follows the F-distribution with (m, n) degrees of freedom?
- A. \( F = \dfrac{X/m}{Y/n} \)Correct
- B. \( F = \dfrac{X}{Y} \)
- C. \( F = \dfrac{X/n}{Y/m} \)
- D. \( F = \dfrac{X + Y}{m + n} \)
Explanation. By definition, \( F = \dfrac{X/m}{Y/n} \), the ratio of two independent chi-square variates each divided by its degrees of freedom, follows the F-distribution with (m, n) d.f., named after R.A. Fisher.
Q2
Two independent samples of sizes 11 and 9 from normal populations give sums of squares of deviations from their respective means as 150 and 40. The value of the test statistic \( F_0 = s_X^2 / s_Y^2 \) is
- A. 3.75
- B. 3Correct
- C. 0.33
- D. 15
Explanation. \( s_X^2 = \dfrac{150}{11-1} = 15 \) and \( s_Y^2 = \dfrac{40}{9-1} = 5 \), so \( F_0 = 15/5 = 3 \). Dividing the raw sums gives 3.75; inverting the ratio gives 0.33.
Q3
To test \( H_0: \sigma_1^2 = \sigma_2^2 \) against \( H_1: \sigma_1^2 > \sigma_2^2 \), samples of sizes \( m = 13 \) and \( n = 11 \) give \( s_1^2 = 45 \) and \( s_2^2 = 15 \). Given \( f_{(12,10),0.05} = 2.91 \), at 5% level
- A. \( F_0 = 3 \) and \( H_0 \) is rejectedCorrect
- B. \( F_0 = 3 \) and \( H_0 \) is not rejected
- C. \( F_0 = 0.33 \) and \( H_0 \) is not rejected
- D. \( F_0 = 30 \) and \( H_0 \) is rejected
Explanation. \( F_0 = s_1^2/s_2^2 = 45/15 = 3 \) with d.f. \( (13-1, 11-1) = (12, 10) \). For \( H_1: \sigma_1^2 > \sigma_2^2 \) we reject when \( F_0 \ge f_{(12,10),0.05} \); since \( 3 > 2.91 \), \( H_0 \) is rejected.
Q4
The lower critical value \( f_{(8,7),0.95} \) is not given in the F-table. If \( f_{(7,8),0.05} = 3.50 \), then \( f_{(8,7),0.95} \) is
- A. 3.50
- B. 0.95
- C. 0.286Correct
- D. 0.125
Explanation. The book's rule is \( f_{(m-1,n-1),1-\alpha} = \dfrac{1}{f_{(n-1,m-1),\alpha}} \), with the degrees of freedom swapped. So \( f_{(8,7),0.95} = \dfrac{1}{3.50} = 0.286 \), as in Example 3.1.
Q5
Consider the following statements about the F-test for the ratio of two normal population variances.
1. The populations from which the samples are obtained must be normally distributed.
2. The two samples must be independent of each other.
3. The two samples must be of the same size.
Which of these are assumptions of the test?
- A. 1 and 2 onlyCorrect
- B. 1 and 3 only
- C. 2 and 3 only
- D. 1, 2 and 3
Explanation. The chapter lists two assumptions: the populations must be normally distributed and the two samples must be independent. Unequal sizes are allowed, as with \( m = 25 \) and \( n = 18 \) in Example 3.2.
Q6
When the population means \( \mu_X \) and \( \mu_Y \) are known, the statistic \( F = \dfrac{\frac{1}{m}\sum (x_i - \mu_X)^2}{\frac{1}{n}\sum (y_i - \mu_Y)^2} \) for testing the equality of two normal population variances follows, under \( H_0 \),
- A. \( F_{(m,\,n)} \)Correct
- B. \( F_{(m-1,\,n-1)} \)
- C. \( F_{(n,\,m)} \)
- D. \( F_{(m+n-2)} \)
Explanation. With known means no degree of freedom is lost in estimating them, so the divisors are m and n and the statistic follows \( F_{(m,\,n)} \) (Note 3). With sample means the d.f. are \( (m-1, n-1) \).
Q7
In an analysis of variance the grand total of all 12 observations is \( G = 60 \). The correction factor C.F is
- A. 300Correct
- B. 3600
- C. 5
- D. 30
Explanation. \( C.F = \dfrac{G^2}{n} = \dfrac{60^2}{12} = \dfrac{3600}{12} = 300 \). 3600 forgets to divide by n, and 5 is the mean \( G/n \).
Q8
In a one-way ANOVA with \( k = 3 \) treatments and \( n = 15 \) observations, \( SST = 40 \) and \( SSE = 60 \). The value of \( F_0 \) is
- A. 0.67
- B. 4Correct
- C. 8
- D. 0.25
Explanation. \( MST = \dfrac{SST}{k-1} = \dfrac{40}{2} = 20 \), \( MSE = \dfrac{SSE}{n-k} = \dfrac{60}{12} = 5 \), so \( F_0 = 20/5 = 4 \). 0.67 divides raw sums; 8 forgets to divide SST by 2.
Q9
In a two-way ANOVA with 4 treatments and 5 blocks, \( SSB = 64 \) and \( SSE = 48 \). The F-ratio for blocks \( F_{0b} \) is
- A. 1.33
- B. 16
- C. 4Correct
- D. 3
Explanation. \( MSB = \dfrac{SSB}{m-1} = \dfrac{64}{4} = 16 \) and \( MSE = \dfrac{SSE}{(k-1)(m-1)} = \dfrac{48}{3 \times 4} = 4 \), so \( F_{0b} = MSB/MSE = 16/4 = 4 \).
Q10
In a one-way ANOVA, four treatments have 5, 6, 7 and 6 observations. The critical value is read from the F-table with degrees of freedom
- A. (3, 23)
- B. (3, 20)Correct
- C. (4, 24)
- D. (20, 3)
Explanation. Here \( k = 4 \) and \( n = 5 + 6 + 7 + 6 = 24 \). The critical value is \( f_{(k-1,\,n-k),\alpha} = f_{(3,\,20),\alpha} \): treatment d.f. first, error d.f. second. 23 is the total d.f.
Q11
Which of the following is a demerit of one-way ANOVA?
- A. Its layout is difficult to understand.
- B. It cannot compare more than two means.
- C. Verification of the normality assumption may be difficult.Correct
- D. Every treatment must have the same number of observations.
Explanation. The book lists two demerits: the population variances of the treatments need to be equal, and verification of the normality assumption may be difficult. Its layout is simple, and treatment sizes need not be equal.
Q12
Assertion (A): The accuracy of the test in two-way ANOVA is considerably higher than in one-way ANOVA.
Reason (R): In two-way ANOVA the additional factor, block, is used to reduce the error variance.
- A. Both A and R are true and R is the correct explanation of ACorrect
- B. Both A and R are true but R is not the correct explanation of A
- C. A is true but R is false
- D. A is false but R is true
Explanation. The chapter states that two-way ANOVA is more accurate because the block, a control factor, removes part of the variation that would otherwise sit in the error, reducing the error variance. R explains A.
Q13
In two-way ANOVA a study variable is compared over three or more groups while controlling another variable. The control factor is usually called
- A. Treatment
- B. BlockCorrect
- C. Error
- D. Level
Explanation. In two-way ANOVA the grouping factor is called the Treatment and the control factor is called the Block. Error is the residual variation, not a factor.
Q14
Which statement correctly compares one-way and two-way ANOVA?
- A. One-way ANOVA has two independent variables.
- B. Two-way ANOVA compares levels of only one factor.
- C. In one-way ANOVA the number of observations need not be the same in each treatment group.Correct
- D. In two-way ANOVA the treatment groups may have unequal numbers of observations.
Explanation. By the book's comparison table, one-way ANOVA has one independent variable and need not have equal observations per treatment; two-way ANOVA has two independent variables and needs equal observations in each treatment group.
Q15
Samples of 9 marks from school A and 9 from school B give \( F_0 = s_X^2/s_Y^2 = 0.25 \). To test \( H_1: \sigma_X^2 < \sigma_Y^2 \) at 5% level, given \( f_{(8,8),0.05} = 3.44 \), the decision is
- A. Reject \( H_0 \), since \( 0.25 < 0.291 \)Correct
- B. Do not reject \( H_0 \), since \( 0.25 < 3.44 \)
- C. Do not reject \( H_0 \), since \( 0.25 > 0.05 \)
- D. Reject \( H_0 \), since \( 0.25 < 3.44 \)
Explanation. For \( H_1: \sigma_X^2 < \sigma_Y^2 \) the critical value is \( f_{(8,8),0.95} = 1/3.44 = 0.291 \) and we reject when \( F_0 \le 0.291 \). Since \( 0.25 < 0.291 \), \( H_0 \) is rejected.