Control of Microorganisms by Chemical Methods - 12th Micro Biology MCQ
Chapter 3 of 12th Micro Biology explains how chemicals control microorganisms: disinfectants, antiseptics and antibiotics, factors that affect germicides, major groups from phenol to gaseous sterilants, the phenol coefficient test, classification and mode of action of antibiotics, susceptibility testing and drug resistance.
Study this chapter
Asked in previous board exams
5 questions from this chapter came in 3 past public exams. Open any of them to see the answer and explanation.
-
March 2026
________ is used to prevent infection by killing or inhibiting pathogen growth on animal tissue.See answer in the solved paper →
-
March 2025
Which of the following agents are used as a preservative in Ophthalmic Solution ?See answer in the solved paper →
-
March 2025
__________ is used in lake and swimming pools to retard the growth of algae.See answer in the solved paper →
-
March 2023
Thermometers are disinfected by immersing in __________ for 10 to 20 minutes.See answer in the solved paper →
-
March 2023
Which among the following agent is used as a preservative in ophthalmic solution ?See answer in the solved paper →
About Control of Microorganisms by Chemical Methods
Medium ~60 min study
Control of Microorganisms by Chemical Methods is the third chapter of the Tamil Nadu State Board Class 12 Micro Biology book. After the physical methods of sterilization learnt in Class 11, students now study disinfectants, antiseptics, antibiotics and chemotherapeutic agents.
The chapter defines the basic terms, lists the factors that change the power of a germicide and describes each major group: phenolics, alcohols, halogens, heavy metals, quats, aldehydes and sterilizing gases. It then turns to the evaluation of chemicals, the history and classification of antibiotics, their mode of action, the Kirby-Bauer, MIC, E-test and MBC methods, and the ways bacteria resist drugs.
This page brings together the one mark book-back questions with answers worked out from the lesson, and additional questions on agents, concentrations, tests and scientists, each with a short explanation.
What you'll learn
- Define disinfectant, antiseptic and antibiotic and give examples of each.
- Distinguish bactericidal from bacteriostatic agents.
- List the factors that influence the activity of a chemical agent.
- Describe the major groups of antimicrobial chemicals and their uses.
- Calculate a phenol coefficient from test results.
- Explain the mode of action of antibiotics and how susceptibility is tested.
Before you start
- Physical methods of sterilization studied in Class 11 Micro Biology.
- Structure of the bacterial cell wall, membrane and ribosomes.
- Gram positive and Gram negative bacteria and bacterial endospores.
Topics covered in this chapter
Control of Microorganisms by Chemical Methods explained
What this chapter covers
Basic terms
Disinfectants act on inanimate objects and are toxic to tissues; antiseptics are safe on living tissue; antibiotics are produced by microorganisms. The suffix -cide means killing and -static means preventing growth. Bactericidal action is irreversible, bacteriostatic action is reversible.
Factors and mode of action
Concentration, time of exposure, temperature, organic matter, number of organisms and the presence of spores decide how well a germicide works. Chemicals damage membrane lipids and proteins and denature enzymes by breaking hydrogen and disulfide bonds.
Major groups
Phenol (Lister, 1867) and phenolics such as Lysol and hexachlorophene; ethanol at 70%; iodine, chlorine, hypochlorite and iodophores; heavy metals such as silver nitrate and copper sulfate; quats such as cetrimide and Savlon; formaldehyde and 2% glutaraldehyde; and the gases ethylene oxide, formaldehyde and betapropiolactone.
Evaluation and antibiotics
The agar plate, tube dilution and phenol coefficient methods test chemicals. Antibiotics are classed by target group, spectrum and mode of action, and are tested by disc diffusion, MIC, E-test and MBC. Bacteria resist drugs by reduced permeability, efflux, inactivation, target change and altered pathways.
Common mistakes to avoid
- Calling alcohol sporicidal. Alcohols are bactericidal and fungicidal but do not kill spores.
- Treating disinfectants and antiseptics as the same. Disinfectants are for inanimate objects; antiseptics are safe on living tissue.
- Thinking higher dilution means a stronger phenol. Phenolic activity falls off very rapidly with dilution.
- Mixing hypochlorite with acids or ammonia, which releases toxic chlorine gas.
- Expecting antibiotics to cure the common cold. They are not effective against viral infections.
Test yourself on these with the practice test, then check the worked reasoning in the solved MCQs.
Frequently asked questions
What is the difference between a disinfectant and an antiseptic?
A disinfectant eliminates microorganisms from inanimate objects or surfaces and is generally toxic to human tissues; chlorine and copper are examples. An antiseptic kills or inhibits the growth of microorganisms but is safe to use on human tissues; phenol and tincture of iodine are examples.
How do bactericidal and bacteriostatic agents differ?
Bactericidal agents kill bacteria, act irreversibly, inhibit cell wall formation and do not depend on the host immune system; beta-lactams and vancomycin are examples. Bacteriostatic agents only prevent growth, act reversibly, inhibit DNA replication and protein synthesis, and work with the host immune system; tetracyclines are an example.
What are iodophores?
Iodophores are combinations of iodine and organic molecules, such as wescodine, betadine and previdone. They contain surface active agents, cause less skin irritation than free iodine and do not stain. They are used for cleaning wounds and as a general purpose laboratory disinfectant for discard jars.
Why is ethylene oxide used for gaseous sterilization?
Ethylene oxide kills all bacteria including tubercle bacilli and spores, and it rapidly penetrates packing materials, even plastic wrappers. It is used for heart lung machines and plastic items like catheters. It is explosive in pure form, so it is mixed with carbon dioxide, and sterilized items are kept in detoxification chambers.
How is the phenol coefficient calculated?
Dilutions of phenol and the test disinfectant are inoculated with Staphylococcus aureus or Salmonella typhi, and subcultures are checked at 5, 10 and 15 minutes. The highest dilution killing in 10 but not in 5 minutes is found for each. In the book, 450 divided by 90 gives a coefficient of 5.
What are the main modes of action of antibiotics?
Antibiotics inhibit cell wall synthesis (penicillin, vancomycin), inhibit protein synthesis at 30S or 50S ribosomal subunits (streptomycin, tetracycline), inhibit nucleic acid synthesis (quinolones, rifampin), disrupt the cell membrane (polymyxins) or block metabolic pathways as antimetabolites (sulfonamides, trimethoprim).
What is the Kirby-Bauer disc diffusion test?
Introduced by Kirby and Bauer in 1966, it places filter paper discs of known antibiotic concentration on a Mueller-Hinton agar plate inoculated with the test bacterium. After 16 to 18 hours the zones of inhibition are measured and compared with a standard table to call the pathogen susceptible, intermediate or resistant.
Last updated 28 October 2026