Industrial Microbiology - 12th Micro Biology MCQ
Chapter 6 of 12th Micro Biology covers industrial microbiology: primary and secondary metabolites, primary and secondary screening, strain improvement, preservation of cultures, fermenter design and media, upstream and downstream processing, and the industrial production of penicillin, wine, single cell protein and citric acid, ending with immobilization of enzymes and cells.
Study this chapter
Asked in previous board exams
4 questions from this chapter came in 3 past public exams. Open any of them to see the answer and explanation.
-
March 2026
________ metabolites are produced in small quantities during industrial production.See answer in the solved paper →
-
March 2026
Which among the following is appropriate for secondary screening method ?See answer in the solved paper →
-
March 2025
__________ is an example for primary screening.See answer in the solved paper →
-
March 2023
__________ method is used for preservation of sporulating micro-organisms.See answer in the solved paper →
About Industrial Microbiology
Medium ~60 min study
Industrial Microbiology is the sixth chapter of the Tamil Nadu State Board Class 12 Micro Biology book. It begins with the Latin root of fermentation, Fervere, meaning to boil, and with Pasteur's studies on fermentation, from which industrial microbiology largely grew.
The chapter follows a product from the soil to the market: isolating and screening microbes, improving and preserving strains, growing them in a fermenter on a suitable medium, and recovering the product. Four case studies, penicillin, wine, single cell protein and citric acid, show these steps at work, and the chapter closes with immobilization.
This page gathers the one mark questions of the book exercise with answers checked against the lesson, plus additional questions on screening, fermenter parts, sterilization, downstream processing and the four products, each with a short explanation.
What you'll learn
- Distinguish primary and secondary metabolites with examples.
- Describe the crowded plate and giant colony techniques of screening.
- List the techniques of strain improvement and the methods of preserving cultures.
- Name the parts of a fermenter and their functions.
- Compare upstream and downstream processing and batch, continuous and fed batch fermentation.
- Outline the industrial production of penicillin, wine, single cell protein and citric acid.
Before you start
- Bacterial growth curve: lag, log, stationary and death phases.
- Sterilization by heat and filtration from earlier chapters.
- Basic idea of fermentation and of yeasts and moulds.
Topics covered in this chapter
Industrial Microbiology explained
What this chapter covers
Metabolites and screening
Primary metabolites such as amino acids, vitamins and organic acids are made in the logarithmic phase; secondary metabolites such as antibiotics, alkaloids and steroids appear near the stationary phase in small amounts. Primary screening uses the crowded plate technique, auxanography and enrichment culture; secondary screening, such as the giant colony technique, sorts out isolates of real commercial value.
Strains, preservation and fermenters
Strain improvement uses mutant selection, recombination, regulation, genetic engineering and protoplast fusion. Cultures are preserved by desiccation, agar slopes, liquid nitrogen, drying and lyophilization. A fermenter of stainless steel or glass carries an impeller, sparger, baffles, probes and a cooling jacket, and media use molasses, whey, corn steep liquor and peptones.
Processing
Upstream processing covers inoculum development, scale up, media preparation and sterilization; fermentation is batch, continuous or fed batch. Downstream processing, often more than half the cost, recovers the product.
Industrial products
Penicillin comes from Penicillium chrysogenum, wine from Saccharomyces ellipsoideus, SCP from algae, bacteria, yeasts and fungi, and citric acid from Aspergillus niger. Immobilization fixes enzymes or cells on a matrix for repeated use.
Common mistakes to avoid
- Calling the crowded plate technique a secondary screening method. It is a primary screening method; the giant colony technique is secondary screening.
- Placing secondary metabolites in the log phase. They appear near the stationary phase; primary metabolites form in the log phase.
- Treating lyophilization as a strain improvement method. It is freeze-drying, a preservation method.
- Naming Penicillium notatum as the commercial strain. Penicillin was first obtained from P. notatum, but P. chrysogenum is the high yielding commercial strain.
- Mixing up sterilization conditions: batch at 121°C for 20 to 60 minutes, continuous at 140°C for 30 to 120 seconds.
Test yourself on these with the practice test, then check the worked reasoning in the solved MCQs.
Frequently asked questions
What is the difference between primary and secondary metabolites?
Primary metabolites such as amino acids, vitamins, enzymes and organic acids are essential for growth and are produced in the logarithmic phase. Secondary metabolites such as antibiotics, alkaloids and steroids have no role in growth, are produced near the stationary phase in small quantities and are difficult to extract.
How does the crowded plate technique work?
Soil is serially diluted and spread on nutrient agar plates. After incubation, plates having 300 to 400 colonies are examined; a zone of inhibition around a colony shows that it produces an antibiotic. Using a test organism improves the technique, and the zone diameter is measured in millimetres.
What is secondary screening?
Secondary screening sorts out microorganisms of real commercial value from the many isolates of primary screening. It is qualitative and quantitative, uses chromatography, detects genetic instability and tells the optimum conditions and yield potential. The giant colony technique with Streptomyces is one method.
Why is strain improvement needed?
Wild strains produce commercially important compounds only in small quantities, which is not economical. Changing their gene pattern or regulating their enzymes makes them overproduce the product. Mutant selection, recombination, regulation, genetic engineering and protoplast fusion are used.
What is the difference between batch, continuous and fed batch fermentation?
In batch fermentation medium and culture are fed once and nothing but oxygen is added until harvest. Continuous fermentation is an open system where medium is constantly removed and replaced, using chemostats or turbidostats. Fed batch adds extra nutrients during the run but harvests at the end.
How is wine produced?
Grapes are stemmed, cleaned and crushed; the must is treated with sulfur dioxide or pasteurized, then inoculated with Saccharomyces ellipsoideus. White wine ferments at 10 to 21°C for 7 to 12 days and red wine at 24 to 27°C for 3 to 5 days. Racking, aging and fining follow.
What is single cell protein?
Single cell protein is microbial cells or total protein from a pure microbial culture used as a protein supplement for humans or animals. The term was coined by C.L. Wilson in 1966. Spirulina, Chlorella, Pseudomonas, yeasts and Agaricus are used, and Pruteen was the first commercial SCP.
Last updated 28 October 2026