Industrial Microbiology - Study Notes
Introduction
- Industrial microbiology studies and uses microorganisms that make products of industrial and economic value: foods (bread, cheese, yogurt, pickles) and beverages (beer, wine).
- It largely began with Pasteur's studies on fermentation. Fermentation comes from the Latin verb Fervere, to boil, because CO2 bubbles form.
- Strictly, fermentation is an anaerobic biological process; industrially, any microbial process giving a product of economic value is called fermentation.
- Eduard Buchner (Nobel Prize in chemistry, 1907) showed that a cell-free yeast 'press juice' containing zymase could ferment sugar.
6.1 Metabolites and products
| Primary metabolites | Secondary metabolites |
|---|---|
| Essential for growth | No role in growth or reproduction |
| Produced in the logarithmic phase | Produced near the stationary phase |
| Amino acids, nucleotides, vitamins, enzymes, organic acids; ethanol, acetone, lactic acid | Antibiotics, alkaloids, steroids, gibberellins, pigments |
| Large quantities | Small quantities, difficult to extract |
- Table 6.1: lactic acid - Lactobacillus delbrueckii; citric acid - Aspergillus niger; acetic acid - Acetobacter; ethanol - Saccharomyces; penicillin - Penicillium chrysogenum; vitamin - Streptomyces.
- Nutritional (food) yeast is Saccharomyces cerevisiae killed during manufacture; it is a vegan food.
6.2 Screening
- Microbes are isolated from soil, lakes, river mud and unusual habitats (deserts, deep sea, petroleum fields).
- Primary screening: crowded plate technique, auxanography, enrichment culture. In the crowded plate technique, serially diluted soil is spread on nutrient agar; plates with 300 to 400 colonies are checked for zones of inhibition, measured in millimetres.
- Enrichment: sole carbon source favours the target microbe; soil calcium carbonate enrichment isolates actinomycetes.
- Secondary screening: qualitative and quantitative; uses paper or thin layer chromatography; detects genetic instability; gives optimum conditions and yield. Giant colony technique: Streptomyces grown at the centre, test organisms streaked from the edge.
- An industrial strain should be high yielding, genetically stable, free of undesirable products, easy to grow on a large scale and pure, free even from bacteriophages.
6.3 Strain improvement
- Manipulating and improving strains to raise metabolic capacity; wild strains give low yields.
- Techniques: selection of mutants, recombination, regulation, genetic engineering, protoplast fusion (fusion of two cell-wall-less protoplasts).
- Improved strains use cheap raw materials, tolerate high product concentration, shorten fermentation time and excrete the product (example insulin overproduction).
6.4 Preservation of cultures
| Method | Key fact |
|---|---|
| Desiccation | Water removed; sand, silica gel or paper strips; actinomycetes |
| Agar slopes | About six months; one year under mineral oil |
| Liquid nitrogen | Most common for long storage; cryoprotective agent |
| Drying | Sporulating organisms; dry soil kept at 4 to 5°C |
| Lyophilization | Freeze-drying in ampoules; cheap, easy to ship; ampoules hard to open |
6.5 Fermenters and media
- Key parameters: agitation rate, oxygen transfer, pH, temperature and foam. Built of stainless steel or glass; must withstand steam sterilization and vacuum.
- Parts: impeller (stirs, distributes oxygen), sparger (sterile air), baffles (break vortex), air filters, rota meter (flow rate), pressure gauge, probes for temperature, pH, dissolved oxygen, level and foam, cooling jacket, sampling point, valves.
- Antifoams: animal and vegetable oils, lard oil, corn oil, soya bean oil.
- Types: stirred tank, tower, air lift, packed bed, fluidized bed, photo bioreactors.
- Media: molasses, malt extract, whey, methanol (cheapest, for SCP), sulfite waste liquor; nitrogen from ammonium salts, urea, corn steep liquor, yeast extract, soy meal, peptones. Precursor: phenyl acetic acid for penicillin.
Upstream and downstream processing
- USP: inoculum development (1-10% of medium), scale up in 3-4 stages (pilot 5-200 litres), media preparation and sterilization (batch 121°C, 20-60 min; continuous 140°C, 30-120 s, saving 80-90% energy).
- Batch: closed, only oxygen added. Continuous: open, chemostat and turbidostat. Fed batch: nutrients added during the run.
- DSP: often over 50% of cost. Cell disruption by physical (ultrasonication, osmotic shock), chemical (alkalies, detergents) or enzymatic (lysozyme, glucanase) methods, then separation, concentration, chromatography and formulation.
6.6 to 6.10 Products
- Penicillin: first from Penicillium notatum; commercial strain P. chrysogenum (Q-176 from NRRL 1951 by X-rays and UV). 6-APA with thiazolidine and beta-lactam rings. Medium: lactose, corn steep liquor, phenyl acetic acid; 25-26°C, 3-5 days, pH 7-7.5. Second phase gives intense synthesis. Semi synthetic example: ampicillin.
- Wine: grapes of Vitis vinifera; Saccharomyces ellipsoideus; enology; SO2 treatment of must; racking, aging, fining with casein, tannin, bentonite.
- SCP: term by C.L. Wilson (1966); Spirulina 'Dihe' cakes near Lake Chad; Pruteen (72% protein) from Methylophilus methylotrophus on methanol.
- Citric acid: Aspergillus niger; Koji (solid state), liquid surface and submerged methods; 28-30°C, 8-12 days; excess iron and manganese spoil yield.
- Immobilization: carrier binding, cross linking, entrapping, combining; materials such as calcium alginate, agarose, polyacrylamide.
More for this chapter
Book Back Questions8 textbook MCQs · solved
Additional MCQs25 extra MCQs · solved
Practice TestInteractive · instant score
Book Back TestTest yourself on the textbook set
Additional MCQ TestTest yourself on the extra set
Formula SheetAll key formulas